|
http://www.ozvalveamps.elands.com/gunn.htm | Last update:
19:39 19/01/08
<<<OzValveAmps |
Auckland, New Zealand
Contains:| 100 Classic 2x12 combo, 50 Head |
Clarry Schollum of 34AUDIO in NZ wrote (24/9/07):
these were built in Auckland by Ken Wilson (died years ago) Have factory data / schematic for Gunn Classic (1976)
Examined one of their 100 watt heads in the Music Swop Shop. Both the valve lineup and the size of the transformers really look the goods for 100 watts. A very solid head.
from New Zealand Musician magazine, Vol. 8, No. 3 June/July, 1999
Matt's Speaker Facts
By Matt Hennessey
“Old Kiwi Valve Guitar Amplifiers”Gunn 100
The amp I tested used 3 x ECC83, 1 x ECC82, and 4 x EL34 output valves. The power amp circuit is similar to some 200 watt Marshall types. The two channel amp had simple tone controls on channel one and Marshall type tone controls with a simple foot switchable gain boost on channel two. Gunn made a variety of 50 and 100 watt amplifiers, some in combos.
Price Paid: 200 ($NZ) used Made around 1979. All tube design with reverb, tremolo and two channels. Submitted by Adrian Source: Harmony-Central --- Price Paid: 400 ($Aud) used It came with a 4x12 cab. Submitted by David Source: Harmony-Central --- Price Paid: 100 (NZ) 2 channels vol treble middle bass and presence Alron 4 x 12 cab Submitted by Allan Roper Source: Harmony-Central --- Price Paid: 200 (NZ) used New Zealand made amp early 80's no reverb, no head phone jack, 2 main speaker outputs 2 inputs Marshall 4x12 cab loaded with celestion classic lead 80's Submitted by matt at 02/13/2001 03:33 Source: Harmony-Central
Price Paid: a few hundred dollars NZ used 50w all-tube amplifier, probably in the 70's. Around 25-30 years old. Large, about a metre and a half long and fairly hefty. Two channels (each with twin inputs) each with separate volume knob, Channel 1 has a blunter, low-end feel to it, would suit a bass guitar. Channel 2 is more high gain, with a crisper, treble tone. Treble/mids/bass and presence control, Power and standby switch. Two speaker outputs (one primary, one secondary) 16,8 or 4 ohms. Submitted by Ben Lane at 02/01/2004 13:46 Source: Harmony-Central --- Price paid: $22 2 channel, 2 (what looks like) GEC KT66s. From: Brad/Matt Parker Thu Dec 13, 2001 Source: ANZamps
<<<OzValveAmps
http://www.ozvalveamps.elands.com/gunn.htm | Last update: 17:53 29/01/06 |